192.168.100.1 Admin Login - Default 192.168.100.1 Username, Passwords & IP Address
If you are trying to access your router’s admin page for home or office work by using the IP address 192.168.100.1, no problem! The IP address 192.168.100.1, commonly referred to as a private IP, falls within a special range and is typically used for local networks.
Many people type 192.168.I00.1 instead of 192.168.100.1, which is a common typing mistake that results in an invalid IP address, causing the page not to work. The correct IP address is 192.168.100.1 and is used by providers such as Huawei, Converge, PLDT, Globe, TP-Link, D-Link, and Netgear.
These addresses permit users to access their router’s web page, from which they can control all network settings, such as changing their Wi-Fi SSID and password, managing security, updating features like firewalls and port forwarding, and handling connected devices. Accessing the 192.168.100.1 admin panel is essential for supporting a secure, fast, reliable, and personalized network experience.
How to Log In to the 192.168.100.1 Router Admin Panel
Here is a simple and easy step-by-step guide to log in to your 192.168.100.1 router’s admin panel using the default admin credentials to access the internet settings.
Step-by-Step Guide:
Connect to Your Router's Network
Firstly, ensure that your device, such as a mobile phone, laptop, or PC, is connected to the router’s Wi-Fi or a LAN cable. If you are not connected, you will not be able to access the 192.168.100.1 admin login page.
Launch a web browser
Open your preferred web browser, such as Google Chrome, Mozilla Firefox, Safari, or Microsoft Edge. If you encounter an error while loading the page, clear your cache and cookies.
Enter the IP in the address bar.
Type http://192.168.100.1 into the browser’s address bar and click Enter.
Enter the admin username and password.
After this, a login page appears, where you enter the admin username and password. These are typically printed on a label at the back of your router device.
✦ Default Username: admin
✦ Default Password: admin or 1234
Access Router Settings
Once you log in to the homepage, you will take control over all the network settings, including updating the wifi name and password, MAC filtering, parental controls, DNS settings, and configuring port forwarding.
It’s essential to change the login credentials after logging in to protect your router from any misuse or unauthorized access.
Default Username and Password for 192.168.100.1 Routers
Below is a quick reference table of default usernames and passwords commonly used by popular router brands.
Default Username | Default Password | ||
192.168.100.1 | admin | admin | |
Netgear | 192.168.100.1 | admin | password |
Arris | 192.168.100.1 | admin | password |
192.168.100.1 | root | admin | |
192.168.100.1 | admin | 1234 | |
D-Link | 192.168.100.1 | admin | admin |
Check out our guide on 10.10.10.1 for managing router settings, troubleshooting, and login issues.
Forgot the 192.168.100.1 username and password? Here's How to Recover or Reset It
Many users forgot their router login details; no need to worry. Here is a complete guide on how to regain your network settings through 192.168.100.1.
Check for Default Login Credentials
Firstly, check the default information printed on the back of your router device, typically as a label or sticker. Try logging in by using 192.168.100.1 with the default username and password.
If you cannot access the information using the default settings, it means the information has been changed manually, so you will need to reset it.
Perform a Full Factory Reset (When Password Is Unknown)
When your login causes errors, then the perfect option is to reset it to factory settings. The reset option will delete all your data and saved information, and restore the device to its original factory settings.
Here's how to do it safely:
Firstly, you need to obtain a pointed object, such as a pin or needle.
Find the reset button on the side or back of your router.
Press the button and insert the pin into the hole. Then, press down and hold for 10 to 15 seconds.
Lose the button; unless the router’s lights are turned off, it will restart automatically, and the lights will turn on.
Open a web browser and type http://192.168.100.1.
Enter the default login details to log in.
After resetting, you will lose all your custom data, so you will need to set up a new Wi-Fi name and password. The password should be strong, consisting of a mixture of letters, numbers, and special characters.
Guide to Changing WiFi Name, SSI, D, and Password Using 192.168.100.1 for Different Router Brands
It is essential to change your Wi-Fi network name (SSID) and password to customize your network, improve security, and protect it from unauthorized access. Individuals with brands such as TP-Link, Netgear, Arris, Huawei, Converge, and PLDT can access the admin login page via the 192.168.100.1 IP address to modify settings. After logging in, users reach the wireless settings, where they can manage unknown devices, limit device access, update the internet speed, and change the Wi-Fi name or password according to their preferred choices. Below is the brand-wise easy-to-follow guide:
TP-Link
Type 192.168.100.1 into your router’s browser to log in to the dashboard.
Here’s a login page showing username and password boxes.
Enter default credentials:
Username: admin
Password: admin
Go to Basic settings > Wireless.
Under Wireless Settings, you can set a new Wi-Fi name (SSID) and password.
If your router supports 5 GHz, you will require a separate Wi-Fi name for it.
Enter save, and the changes are applied automatically.
Netgear
Open your browser and type 192.168.100.1 or routerlogin.net into the address bar.
Enter your login information:
Username: admin
Password: password
Navigate to Settings > Wireless.
Find the enabled SSID box.
Enter your new Wi-Fi name (SSID).
Run to the Security Option and choose WPA2-PSK [AES].
Set up your new password in the Password space.
Tap Apply to save changes.
Arris
Log in to the router’s login page through the 192.168.100.1 IP address.
Enter default credentials:
Username: (leave blank)
Password: (leave blank)
Tap on the Wireless tab.
Under Wireless Settings, customize your preferred Wi-Fi name and set up a new password.
Click Apply to save the changes.
Huawei (used by PLDT, Converge)
Navigate to the 192.168.100.1 web interface of your Huawei router using your web browser.
Default credentials:
Username: root
Password: admin
Associate with Wi-Fi Settings > Wi-Fi Basic Settings.
Configure both 2.4 GHz and 5 GHz separately if accessible.
Change the Wi-Fi name (SSID).
Begin Security Mode to WPA2-PSK.
Approach the password box and enter a new Wi-Fi password.
Click Save to confirm changes.
PLDT Fiber
Go to 192.168.100.1 in your router’s browser.
Enter default login details.
Username: admin
Password: 1234 or admin.
Go to Network > WLAN Settings.
Select your new Wi-Fi name and password.
Click save.
Restart the router if prompted.
Log in using the 192.168.100.1 IP address.
Huawei’s steps are discussed above.For FiberHome, the default login is
Username: admin
Password: admintelecom
Navigate to WLAN Settings > SSID Settings.
Set up a new SSID name and password.
Save changes and reboots if required.
You can troubleshoot 10.5.50.1 login issues with our troubleshooting guide to fix access and configuration issues.
Troubleshooting Common Issues with 192.168.100.1
Many people face difficulties or errors while logging in to 192.168.100.1. We will discuss common troubleshooting issues and how to resolve them, allowing you to access the homepage where you can manage your network settings.
Incorrect IP Address Entered
Many users mistakenly type the incorrect IP address, such as 192.168.I00.1, with the letter “I” instead of the number “1,” or 192.168.1.1. Because of these common mistakes, login sites can’t be loaded. Ensure you have written the correct IP address, 192.168.100.1, and avoid using spaces or prefixes such as www. To prevent this type of misconfusion, type the IP address directly in the address bar.
IP Address Not Assigned to the Router
Not all routers have the same IP address, like 192.168.100.1. It varies according to the router’s brand or ISP. Check the default settings, which are printed as a sticker on the router’s device. On Windows, press Windows + R, type “cmd,” and then type “ipconfig.” The router’s IP address will then be displayed. On macOS, go to preferences>network>select network>advanced>IP tab.
Not Connected to the Router Network
Firstly, ensure that your device is connected to the router via a Wi-Fi network or an Ethernet cable. A stable wifi connection helps you to reach the login panel easily. Check the VPN; turn it off because it causes difficulty with connectivity to the local IP address.
Router Is Unresponsive or Crashed
Suppose your router is not responding to the IP address and is stuck. Unplug the routers for a few seconds and then plug them back in. Try accessing the page after rebooting. If it still doesn’t work, then reset it to factory settings, which will delete all custom settings.
Firewall or Antivirus Blocking Access
Sometimes the security software, such as antivirus programs, firewalls, and web extensions, may report or block the local IP address. You will need to turn off the firewall and then try reaccessing it temporarily. Make sure no web browser extensions are involved. Try using another browser, such as Chrome, Edge, or Safari, in incognito mode.
Browser Cache or DNS Issues
Delete all cache and cookies, or use private mode, as this can cause clashes when trying to access the login panel. Clear the DNS cache on Windows, restart your computer, and try again.
Router Firmware Issues
Old or corrupt firmware can cause router web applications to fail. Use a different device to access the router. If you gain access, monitor firmware updates under System Administration. However, if you are unable to access the firmware, please contact our customer support service for manual firmware recovery.
ISP Restrictions (for Branded Routers like PLDT and Globe)
Sometimes, particularly with ISP-issued routers such as those from PLDT, Globe, or Converge, the admin panel may be locked or partially accessible. You must log in using the default credentials, such as admin/admin. If the access is limited, then contact the ISP for full system access. Another way is to use a personal router in place of the ISP router to take control and manage activities.
Router Setup & Configuration Using 192.168.100.1
Accessing Router Admin Panel:
Use 192.168.100.1 to access your router’s admin panel.
This gives you complete control over network settings, security, and device management for home or office networks.
Common brands using this IP address include PLDT, Huawei, Arris, TP-Link, D-Link, and Netgear.
Change Default Username and Password:
Change the default username and password to prevent unauthorized access.
Choose a unique username to protect your router from easily guessed defaults.
Secure your 2.4 GHz and 5 GHz bands with strong passwords and WPA2-PSK or WPA3 encryption.
Recommended SSID names: “MyHome2G” (2.4 GHz) and “MyHome5G” (5 GHz).
Wi-Fi Channels and Bandwidth:
Optimize Wi-Fi channels to minimize interference, especially in densely populated areas.
Routers enable you to select less crowded channels for improved performance and reduced connectivity issues.
Enable band steering (if supported) to balance speeds between 2.4 GHz and 5 GHz devices.
MAC Address Filtering for Enhanced Security:
Use MAC address filtering to restrict network access to specific devices only.
This feature is helpful for parental controls, allowing you to set device limits and block unauthorized devices.
LAN Settings and IP Configuration:
Configure the DHCP server to assign IP addresses to devices automatically.
Set static IP addresses for fixed devices to avoid IP conflicts.
Monitor Firmware Updates:
Check for firmware updates regularly to keep your router’s system tools up to date.
Always back up your configuration settings to restore them if needed.
Overall Benefits of Using 192.168.100.1:
Provides complete control over network setup and security.
Improves Wi-Fi speed, stability, and security.
Helps manage devices and optimize network performance for a safer internet experience.
How to Find Your IP Address to Access 192.168.100.1
IP addresses may vary according to the brands, such as Huawei, PLDT, Arris, and others. As your device might be using a different IP address, it’s essential to verify your router’s default IP address.
For Windows:
● EPress Windows + R, type cmd, and press Enter.
● In the Command Prompt, type: ipconfig
● Here is the default IP address of your router.
For macOS:
◆ Navigate to System Preferences > Network.
◆ Choose your stable network connection, then press Advanced.
◆ Go to the TCP/IP tab and look for the router’s IP address.
For Android:
◆ Open Settings > Wi-Fi.
◆ Connect to the network.
◆ Scroll to see the IP address.
For iPhone (iOS):
◆ Go to Settings > Wi-Fi.
◆ Tap the “i” icon alongside your connected network.
◆ Here you will see the router’s IP address.
When you verify or confirm your IP address, 192.168.100.1, you can enter this IP address in your web browser to access the login page. From there, you can enter the username and password and gain access to the dashboard. After that, you can take control of network settings and manage them according to your preferences, and resolve any troubleshooting issues that may arise from there.
Learn how to manage your 192.168.1.254 settings for easy access to the router’s admin panel and troubleshoot login problems.
How to Configure Your Huawei Login Through 192.168.100.1
Connect your device to the Huawei router via Wi-Fi or an Ethernet cable.
Open any web browser.
Type 192.168.100.1 in the browser’s address bar and click Enter.
When the login page shows, enter the default details:
Username: admin or root
Password: admin or 1234
Press Login to access the Huawei router homepage.
After logging in, you can manage the network settings from there, including:
Customize your Wi-Fi name (SSID)
Change your Wi-Fi password.d
Set parental controls
Manage linked devices
Update firewall settings
When changes are done, click Save.
- If prompted, reboot your router.
How to Open IP Ports Using 192.168.100.1 for Better Connectivity
Opening ports on your router via the 192.168.100.1 admin panel is essential for users who need better connectivity for gaming, streaming, CCTV systems, installed applications, and peer-to-peer platforms. When you forward your port, it means allowing particular external data to travel through and reach the selected device on your local network. This is useful in services that need direct incoming connections.
Why Open Ports?
To enhance online gaming experiences, such as those on PlayStation, Xbox, or PC.
Ports open to permit remote access to surveillance servers.
To enhance VoIP call stability or video meeting apps.
To run web applications from your network.
Steps to Open Ports via 192.168.100.1:
Type 192.168.100.1 into your web browser to access the router’s admin page.
Enter your default admin username and password.
Go to Advanced Settings or Port Forwarding/NAT/Virtual Server, depending on the brand of router you are currently using.
Enter the following:
The Port Range, such as 80-80 or 25565-25565
Protocol (TCP, UDP, or Both)
Enter the local IP address of the device.
Give description
Click Apply to confirm.
Restart your router if required.
Opening the wrong port can lead to security risks for your network. Use the open or forwarded ports only when necessary. Consider assigning a static IP address to the device if you plan to open ports, as this will enable automatic connection establishment without requiring manual configuration. Check to see if updating your router’s firmware will ensure fast, secure, and reliable performance.
For troubleshooting 192.168.18.1 routers, our guide covers common login issues and solutions to set up the router.
FAQs
192.168.100.1 is a private IP address usually used as the default gateway for routers and modems. It grants users access to the admin panel, from which you can manage the Wi-Fi name, password, devices, and network activities.
There are several reasons why you may be unable to access 192.168.100.1, including an incorrect IP address, a disconnected router, browser cache or cookies, or a different IP address. Ensure you have a stable network connection and that your IP address is correct.
You need to go to the Wireless Settings, enter a new SSID (Wi-Fi name) and WPA2 password, and then click Apply to save the changes.
Most routers using 192.168.100.1 have default details like:
Username: admin
Password: admin/password
You can also check the label on the back of your router for brand-specific defaults.
If you forget your username or password for 192.168.100.1, press and hold the reset button on your router for 10–15 seconds using a pin. It will reset the router to its factory default settings.