Converge Router Login - Default Converge Router Username & Passwords

It is essential to know how to access ICT logging settings to manage your internet connection, update security protocols, customize admin credentials, fix common login issues, and more.

Learning how to change their converged password via the Converge portal is necessary to protect from any unauthorized access and ensure an easy, fast, and reliable connection.

Step-by-Step Guide to Accessing Your Converge Router Login Settings

Firstly, you have to reach the converged router login page to configure the important network settings. Below are the easy steps discussing how to log in to the Converge admin panel by using the router’s IP address.

Step 1: Connect to Your Converge WiFi Network

You have to make sure your device, such as a PC, laptop, or phone, is connected to the router’s network through WiFi or a LAN cable.

Step 2: Use a Web Browser

Launch any favored web browser like Chrome, Firefox, Edge, or Safari.

Step 3: Type the Default IP Address in the Address Bar

Enter IP 192.168.1.1 or 192.168.0.1 into the browser’s address bar, then click Enter.
The IP addresses vary based on your router’s model.

Step 4: Enter the default credentials

When prompted, enter the default username or password if command prompts, which usually are admin/admin or 1234.

Step 5: Access the Admin Panel

When you log in, you will gain access to the converged routers admin dashboard, from where you can update network settings like changing the Wi-Fi name, updating the password, seeing linked devices, and enabling enhanced security, guest, or parental controls.

How to Change Your Converge WiFi Name and Password

Customizing your Converge WiFi name and password helps you configure your network and enhance your network’s security. However, if you’re using routers like Huawei, ZTE, or FiberHome, the personalizing process is commonly the same. Here are the easy-to-follow steps to change the Wi-Fi name and password.
Steps to Change Converge WiFi Name and Password:

Connect your device to your Converge WiFi network.
Launch a browser and type the standard router’s IP address, 192.168.100.1 or 192.168.1.1, in the address bar.
Log in to the router admin page using the default or updated username and password, which is admin/admin or user1234.
After logging in, navigate to Wireless Settings or WLAN settings.
Locate the SSID of the oWiFi Name box and set up your new unique network name.
Look for the WiFi Password field, enter a powerful password of 8 characters long, which includes letters, numbers, and symbols.
Click Save to confirm changes.
Reconnect all your devices using the new wifi name and password, and reboot if required.

Other Brands

If you’re facing issues with pldt router login, check out our guide to troubleshooting and accessing the admin panel.
Learn how to resolve tenda router login issues with step-by-step instructions on logging into the admin panel.
For zte router login troubleshooting, visit our post on resolving login problems and managing router settings.
Our guide on globe at home router login provides solutions for logging into your router’s admin page and troubleshooting settings.
If you’re having trouble with smartbro login, check out our guide for easy troubleshooting.
Learn how to fix huawei wifi router login issues with our step-by-step instructions for accessing your router’s settings.

Default Converge Login Credentials for Admin Access

The default username and password are used to access your router’s network settings. These credentials are generally printed on the back or bottom of your router as a label or in the user manual. Here are the default credentials used by router brands to reach their admin panel.

Router Brand	Default IP Address	Username	Password
Huawei	192.168.100.1	admin	admin
ZTE	192.168.1.1	user	user1234
FiberHome	192.168.1.1	admin	admin1234
TP-Link	192.168.0.1	admin	admin
Cisco	192.168.1.1	cisco	cisco
Converge Custom	192.168.254.254	admin	Admin or password

How to Log In to Different Converge Routers and Manage Settings (Step-by-Step by Brand)

Converge ICT uses several router brands like TP-Link, Huawei, ZTE, FiberHome, and Cisco to access and manage settings. Although their login process is usually the same, each router may have a moderately different boundary. Below are the step-by-step instructions for each router brand.

TP-Link Router

link to your TP-Link WiFi network.
Open a browser and type the IP 192.168.0.1 or 192.168.1.1.
Enter the default credentials as admin/admin if you have not changed them earlier.
When you reach the dashboard, go to Wireless Settings to update the SSID and password.
Save changes and reboot the router if required.

Huawei Router

Connect your device to the Huawei router’s network.
Use a browser and enter the IP 192.168.100.1.
Use the default login details, which are generally admin/admin, printed on the back of your router.
Go to Wifi Settings to customize the WiFi name or password.
Save the settings and reconnect your devices by using the new details.

ZTE Router

ensures you are linked to the ZTE router’s WiFi.
Type ip 192.168.1.1 or 192.168.254.254 in your browser’s address bar.
Log in using the default credentials, such as admin/admin.
Go to WLAN settings, locate the SSID and password files, and set up an updated one.
Click Save to apply changes.

FiberHome Router

link to the FiberHome WiFi.
Open a browser and enter the IP 192.168.1.1 in the address bar.
Use the default details, which commonly are user/1234 or admin/admin.
Go to Wifi settings to change the SSID, and Security to update the password.
Save and restart the router if prompted.

Cisco Router

Connect your device to the Cisco router.
Use a browser and go to 192.168.1.1.
Enter the login credentials cisco/cisco or admin/admin.
Run to Wireless Settings to change the WiFi name and password.
Save changes and log out for security.

Troubleshooting Common Converge Router Login Issues

If you find an error while logging in to your Converge router’s admin panel, it means this is due to incorrect IP, invalid credentials, browser problems, connectivity issues, and many more. Here is the guide that shows you the common problems that occur and ways to solve them.

Check Your IP Address

Make sure the IP address you entered is correct, as it varies according to the router’s model. The most commonly used IP addresses are 192.168.1.1, 192.168.100.1, and 192.168.254.254, so try logging in by using one of these. Always monitor that you are connected to your converged network through wifi or an Ethernet cable.

Clear Browser Cache or Try a Different Browser

Oftentimes, browsers show issues due to cache or cookies and old versions of the login page. So to fix this, you have to clear the browser cache and cookies or use a different browser.

Restart Your Router and Device

If the network errors persist and the site can’t be loaded, then restart both your router and device. Unplug the router for 10 to 15 seconds and then plug it back in. Restart the device and router, and try to log in again.

Find Your Router's Real IP (If Unknown)

If the IP addresses are not working, then find the correct one by this method:

On Windows, tap Win+R, type cmd, and click Enter.
In the Command Prompt, type ipconfig and hit Enter. Here, the IP address displays your router’s actual IP.

Use a Wired Connection (LAN Cable)

If your WiFi is not stable, then link your device directly to the router through a LAN cable. Wired connections are more definitive when approaching router settings. When you get connected, retry opening the IP login page in your browser.

Try From Another Device

Some routers may block particular devices or have session errors. Try reaching the router login panel from a different phone, tablet, or computer. Make sure the new device is also linked to the Converge WiFi.

Disable VPNs or Browser Extensions

If your Vpn is on or has browser extensions, then it continues to experience errors while loading. So you have to turn off the vpn and disable browser firewall extensions, then refresh the page to avoid disruption.

Top Security Tips for Your Converge ICT Router

Change the Default username and password with a new, unique combination to protect your router settings from any unauthorized access.
Create a Strong WiFi Password that is a mixture of uppercase and lowercase letters, numbers, and symbols. Don’t use simple words that are easily recognizable to secure your network.
Turn on WPA2 or WPA3 Encryption methods rather than old ones, such as WEP, for better security.
Constantly update the Router Firmware to solve the security flaws.
Lock up your SSID WiFi Name, so that outsiders cannot see it.
Monitor connected Devices and limit suspicious users to protect against bandwidth fraud.
Turn off the Remote approach to the router’s admin page, except if needed.
When the changes are made, Log Out of your router settings to avoid seizure.

How to Change Converge WiFi Settings Using Any Device

Personalizing your converge settings is simple, whether you’re using any device like a Windows PC, Android phone, iPhone, Mac, or tablet. You need the router’s admin IP address and default credentials to access the admin dashboard.

On Windows PC / Laptop

1. Connect your PC to the router’s network via WiFi or LAN cable.
2. Go to a browser and type 192.168.1.1 or 192.168.0.1 in the address bar.
3. Enter the admin username and password.
4. Navigate to Wireless Settings.
5. Update your WiFi name and password, then save.

On Android Devices / Tablets

link to your Converge WiFi.
Open any browser and enter the IP 192.168.1.1.
Use the default credentials.
Click on Wifi settings.
Change the WiFi name and password, and save the changes.

On iPhone / iPad (iOS Devices)

Connect to Converge WiFi.
Open your favored browser and go to 192.168.1.1.
Log in with your router’s default username and password.
Go to WiFi Settings.
Modify your SSID and password, then click Save.

On macOS (MacBook / iMac)

link to your Converge router through WiFi.
Open a browser and type the IP 192.168.1.1.
Enter your router’s default credentials.
Go to Basic Settings.
Update the wifi name and password, then confirm the settings.

Note:

If the 192.168.1.1 IP address doesn’t work, then try logging in with another 192.168.0.1 or 192.168.100.1, or monitor the IP address on the back of your router to make sure it’s the correct one.
When the changes are confirmed, reboot the router if prompted.
Always remember to reconnect your devices using the new WiFi credentials.

How to Access and Navigate the Converge Portal

By the Converge portal, you can access your personal dashboard for handling your internet account. It permits users to monitor billing details, modify settings, check their data usage, and view account details.
Overview of Portal Features

Billing Information:
You can see your present and past bills, due dates, and payment records.
Account Settings:
Change your personal information, modify your account password, and handle contact details.
Service Management:
Monitor your active plans, improve services, or call for technical support.
Online Payments:
Pay your bill through credit card, debit card, or e-wallet straight from the portal.
Usage Monitoring:
Detect your internet data usage to avoid disconnections.
Notifications & Alerts:
Receive notifications on maintenance, promos, and account-related messages.

Need Help? Here's How to Reach Converge Support. Convergee

Suppose you find difficulty with your router login, internet connection, or account. It helps you to solve the issues quickly. Hereare the ways to contact them:
Ways to Contact Converge Customer Support:

Hotline: call <strong>1627</strong> (for landline) or (02) 8667 0848 through mobile.
Email Support: Send your problems to customercare@convergeict.com.
Website Live Chat: look up www.convergeict.com and use the live chat opportunity for real-time help.
Facebook Support: contact them directly on their official Facebook page: facebook.com/ConvergeICTOfficial.
Self-Service Portal: Log in at https://gofiber.ph to handle your account, check bills, and report problems.
Service Centers: go to your nearby Converge office for on-site customer care.
Mobile App: monitor if the Converge app is available on the Play Store or App Store for accessible account management.

FAQs

How can I change my Converge WiFi password?

Log in to your Converge admin dashboard through IP 192.168.1.1, go to Wireless Security Settings, locate the password key, and set a new strong password.

What's the process to reset and update my Converge WiFi password?

Press and hold the router’s reset button for 10 to 15 seconds using a pin. Then, approach the admin panel and change the password under wireless settings.

What’s the default password for ZTE Converge routers?

The most common default details include admin/admin or user/user. Monitor your router’s label for correct information, as it varies according to models.

How do I log in and change WiFi settings on a Huawei Converge router?

Go to the browser and type the IP address 192.168.100.1, enter the default credentials, which are usually admin/admin. Run to the WLAN settings, search the wifi name and password fields, and set up new ones.

If you find an issue while logging in, make sure you are connected to the stable Converge Wi-Fi, and the IP address you entered is correct.